5.Goto Port Settings tab. Click Advanced. Change the COM Port Number to COM1. 6.Change Latency Timer from 16 to 1. Press ok again. Close Device Manager. 7.Goto Windows(C/Driver_D_CAN_USB and double-click OBDSetup.exe.

It keeps telling me that I don't have the right version of Windows to run the INPA. And since you're running a Samsung 64 bit like me, maybe you can help. Installing ist completed now and prog works. But if I start Inpa and navigate to 'Info' (F1) the Number behind Version says 5.00, is this a failure in installation or is it normal that. You will be left with INPA cable folder. 1.Open INPA cable folder and move the top four folders (step1, step2, step3 and driver) to Windows(C folder of your PC. 2.Whilst in Windows(C, open 01_Step1 folder and copy EC-APPS over to your Windows(C drive. 3.Go back to 01_Step1 folder and open the NFS folder.

It’s useful if you’re trying to debug a problem on your BMW. What to purchase? You need a cable. That’s a fact. You need a DCAN + K-Line cable with a FT232RL usb chip inside the cable. The FT232RL chip is your interface from OBDII to your USB computer. There are cheap cables out there with other interface chips (CH340 for example).

Dell aio 926 driver windows 10 pro. Now it can scan, but it can't print because it can't reach the printer.

2.Press OK if prompted. Select Enlgish then press weiter. 3.Press continue and continue again.

2.Enusre destination path is C: BMW Tools, if it is not change it to that. 3.Press Install. You will get an error.

Press continue. Select BMW Group Rectification programs UK. (NOT USA) Press continue. 5.Under INPA 5.0.1, check off Update. Under NCS Expert 3.0.8, check off Complete. Press continue. 6.Click on Rename.